Site Information

 Loading... Please wait...
  • GP-612 12/24 Volt 10 GPM Gear Pump

10.5 GPM (40 LPM) Gear Pump 12V or 24V. Diesel Fuel or Water Transfer

10.00 LBS
Free Shipping
Minimum Purchase:
1 unit(s)

Product Description

Model GP-612 is a self-priming, compact, powerful, 12 or 24 VDC electric gear pump. Constructed with helical bronze gears, nickel-plated brass body and stainless steel shafts. Suitable for Diesel fuel transfer, Transmission fluid, Light weight lube oils, Water, Antifreeze etc.

THE PUMP IS REVERSIBLE. It can be operated in any direction by reversing the polarity, or it can be wired to a reversing switch.

 The pump has IP55 protection rating

 EN 55014-1 Electromagnetic emission compatibility

Ports: Tapped 1/2" BSP, pump supplied with 2 ea 1/2" NPT adaptors 
Motor: 12VDC or 24VDC, powdered epoxy coated 
Circuit Protection: Install fuse 12V - 30A / 24V - 15A 
Current: See Graphs Below 
Flow Rate: 10.5 GPM
Run dry time, up-to 30 min 
Self Priming With Wet Gears: 13 ft (4 m) 
Working pressure: 36psi
Motor Life: Approx. 2000 hours 
Max. Ambient Operating Temperature: 14-140°F (-10-60°C) 
Pump Body: Nickel plated Bronze 
Shafts: Stainless Steel  
Viton seals

*VITON chemical compatability chart can be found here:

DO NOT USE for gasoline, flammable liquids liquids, food products, corrosive chemicals & solvents. 
Weight: 9.5 lbs 
* A model with lower operating speed is available for lubricating oils and viscous liquids. 




Warranty Information

* The warranty period is 2 years from the date of purchase on the invoice.
The warranty covers only production defects
It does not cover altered, abused, or improperly installed pumps.
The warranty does not cover any installation expenses involved.


Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category