Model GP-612-12H is a self-priming, compact, powerful, 12VDC electric gear pump. Constructed with helical bronze gears, nickel-plated brass body and stainless steel shafts. Suitable for Diesel fuel transfer, Transmission fluid, Light weight lube oils, Water, Antifreeze etc.
THE PUMP IS REVERSIBLE. It can be operated in any direction by reversing the polarity, or it can be wired to a reversing switch.
The pump has IP55 protection rating
EN 55014-1 Electromagnetic emission compatibility
Ports: Tapped 1/2" BSP, pump supplied with 2 ea 1/2" NPT adaptors
Motor: 12VDC, powdered epoxy coated housing
Circuit Protection: Install fuse 12V - 30A
Current: See Graphs Below
Flow Rate: 10 GPM (38 LPM)
Run dry time, up-to 30 min
Self Priming With Wet Gears: 13 ft (4 m)
Working pressure: 36psi
Motor Life: Approx. 2000 hours
Max. Ambient Operating Temperature: 14-140°F (-10-60°C)
Pump Body: Nickel plated Bronze
Shafts: Stainless Steel
*VITON chemical compatability chart can be found here:
DO NOT USE for gasoline, flammable liquids liquids, food products, corrosive chemicals & solvents.
Weight: 9.5 lbs
* A 4GPM model with lower operating speed is available for lubricating oils and viscous liquids.
* The warranty period is 2 years from the date of purchase on the invoice.
The warranty covers only production defects
It does not cover altered, abused, or improperly installed pumps.
The warranty does not cover any installation expenses involved.