Product Description
No plastic parts
Light, compact powerful self-priming gear pump. Nickel plated brass housing and fittings. Stainless shafts and helical cut bronze gears. Fully reversible. Flow rate from 1 GPM for motor oil (will vary, depending on fluid viscosity and temperature). 3/8" NPT male Nickel plated brass fittings on both sides are standard. Optional -6AN, -8AN and 1/2" Hose barb adapters available in the "accessories" page.Suitable for motor oil, diesel fuel, bio-fuel, antifreeze, water etc. It is used also as a turbo scavenge pump in performance motorcycles, snowmobiles etc.
* ISO-16949 and ISO-16750-2 suggest that electrical tests should be performed with 28V supply for 24V-products (and with 14V supply for 12V-products) since the battery voltage is 28VDC while the engine is running.
*Not to be used for gasoline.
Size: 5"L x 3"W x 3"H
Weight: 2lb 12oz
Draw: 1.5A @ 24V
Max working pressure 25 psi
Self priming (Lift) 5 feet
Run dry time, up-to 30 min
Viton seals 
* The above graph is created with water at ambient temperature (70-72F)
Warranty Information
* The warranty period is 2 years from the date of purchase on the invoice.
The warranty covers only production defects
It does not cover altered, abused, or improperly installed pumps.
The warranty does not cover any installation expenses involved.
