12 GPM (46 LPM) Gear Pump 24V for Diesel Fuel or Water Transfer

Product Description

Model GP-614-24 is a self-priming, compact, powerful, 24 VDC electric gear pump. Constructed with helical bronze gears, nickel-plated brass body and stainless steel shafts. Suitable for light oils, Diesel fuel transfer, Transmission fluid, Water, Antifreeze etc.

Included with the pump is a intake screen and two 3/4" (20mm) hose barb adapters. The pump can be used without the screen if so desired. The hose barb adapters can be screwed directly into the pump housing.

THE PUMP IS REVERSIBLE. It can be operated in any direction by reversing the polarity, or it can be wired to a reversing switch.

The pump has IP 67 protection rating

EN 55014-1 Electromagnetic emission compatibility

Pump Housing Ports: Tapped 1/2"" BSP, pump is supplied with Intake screen filter and two custom 3/4" hose barb adapters

Motor: 24VDC, powder epoxy coated steel body

Circuit Protection: Install fuse:  20A slow blow fuse

Current: 8A / 400W

Flow Rate: 12 GPM (46LPM)

Run dry time, up-to 30 min

Self Priming With Wet Gears: 13 ft (4 m)

Working pressure: 30psi / 2bar

Motor Life: Approx. 2000 hours

Max. Ambient Operating Temperature: 14-185°F (-10-85°C)

Pump Body: Nickel plated Bronze

Gears:Bronze

Shafts: Stainless Steel  
Seals: Viton

*VITON chemical compatibility chart can be found here:

http://www.fbs-online.com/Centre/Prod/Viton-chem-com-res.htm

DO NOT USE for gasoline, food products, corrosive chemicals & solvents.

Weight: 11.7 lbs / 5.3 kg

Warranty Information

* The warranty period is 2 years from the date of purchase on the invoice.
* The warranty covers only production defects
* It does not cover altered, abused, or improper installation.
* The warranty does not cover any installation expenses involved.
* Transportation cost is refundable only in the case where warranty claim has been accepted by Enginegear, and will be limited to the actual shipping cost between Enginegear and client's delivery address.
* No credit notes or replacement items will be issued prior to receipt and proper testing of any products that are deemed faulty.