Product Description
No plastic parts
The compact GP-301-24L gear pump is designed to transfer lube oil, diesel fuel, antifreeze, bio-fuel and water. Makes perfect turbo scavenging pump. Utilizing helical cut bronze gears and stainless steel shafts, the GP-301L will transfer liquids up to 2 GPM depending on temperature and viscosity. Used mainly for oil change and diesel fuel transfer, pre-luber, oil scavenging and similar applications. This pump will generate high pressures, but should be limited to 20-30 psi or damage to the motor may occur. 3/8" NPPT male Nickel plated brass fittings on both sides are standard. Optional -6AN, -8AN and 1/2" Hose barb adapters available in the "accessories" page. Viton seals and Nickel plated pump housing.
* ISO-16949 and ISO-16750-2 suggest that electrical tests should be performed with 28V supply for 24V-products (and with 14V supply for 12V-products) since the battery voltage is 28VDC while the engine is running.
IP 67 RATING
Draw: 24V-4A
Fuse Required: 5A "Slow Blow" Type
Self priming up-to 5'
Run dry time, up-to 30 min
Size: 5.5" x 4" x 3"W
Weight: 3 lb 6 oz
* Flow rates are for SAE 30 weight oil thru 1/2" orifice
Warranty Information
* The warranty period is 2 years from the date of purchase on the invoice.
The warranty covers only production defects
It does not cover altered, abused, or improperly installed pumps.
The warranty does not cover any installation expenses involved.
